69 and 73mm Paint Can Holder 3 Tier – SVG file for laser cut

Overall Dimensions: 231 mm Wide x 224 mm Tall x 224 mm Deep
Holds 9 Cans. *This can easily be set side by side (and even glued together).
These can add more storage to your workspace – and the Drawer is a nice place to but sandpaper, rolls of masking tape or whateve you wish.

This is a listing for digital content representing a 3 tier Paint Holder with Drawer using SVG drawings for use in Lightburn and other laser cutting software.

You get the SVG, Ai, Lightburn and DXF Files. I can make adjustments if you like – just reach out.

This holds Behr Sample cans, Standard sized Spray Cans and other cans less than 69mm wide.
69mm = 2.71 Inches

It is intended for use 3mm plywood (or other materials of same thickness) –
I tested with 5.5w Diode Laser using 3mm MDF and actual paints – see picture.

The drawings are organized in sets to fit on small 300mm by 300mm (12 x 12 in) panels for cutting.
Requires 5 12×12 3mm plywood panels to complete all required cuts .

NOTE: Drawer is 218×223 mm and 60 mm deep.